Toggle Nav
Importazione e distribuzione componenti elettronici, materiale elettrico ed elettronica | Scopri qui
ART.
07/05630-00
PRE-SENSIT.BOARD 1xSIDE 50x100mm
PIASTRA PRES.SING.FACCIA 100x220
Look at the products of the same family
Laboratory accessories
Pack of 10 pc
Details
In vetronite with positive photoresist copper plating.
THICKNESS:1,6 mm
BOARD PREPARATION:1) Place original on vetronite, as shown in the technical drawing, and expose to lamp light. NOTE: exposure time varies according to type of lamp used. For example, U.V. lamps require exposure time of about 2-3 minutes, while halogen lamps from 800 W require about 3 minutes.
2) Immerse board for about two minutes in a container of pre-prepared developer 7/5690. This immersion time will also vary according to the concentration of developer and the temperature. However, being a "visible phenomenon," the process is easy to control.
3) Engraving: After rinsing under running water, immerse board in a container of pre-prepared acid 7/327. To decrease engraving time, acid should be kept at 30° - 40°C. Photoresist can be removed from the tracks with any solvent.
COPPER THICKNESS:35u
BOARD THICKNESS:1,6mm
| Qty for package | 10 |
|---|---|
| Unit of measure | Pieces |
| Dimensions | 100x220 mm |
| Plate Type | Singola faccia |
Documentation
Print page
Click here
Ai sensi dell’articolo 5 del regolamento (UE) 2023/988 – Sicurezza generale dei prodotti, ELCART garantisce la sicurezza del prodotto se questo è installato, utilizzato e manutenuto propriamente e secondo le proprie caratteristiche e le istruzioni fornite. Il prodotto è conforme alla normativa europea vigente applicabile