HDMI SPLITT.EXT.60MT CAT6 RC POC

This extender allows to transmit the HDMI signal over a single LAN cable (CAT6 recommended) over long distances.

Thanks to the PoC (Power over Cable) technology this kit uses only one power supply on the transmitter; the receiver will receive power directly from the LAN cable (no second power supply on the receiver).

There is also the possibility of extending the remote control signal up to 60m, and thanks to the LoopOut HDMI port, it is possible to distribute the HDMI signal in the local and remote output simultaneously.

FEATURES:

Supports HDMI V1.3 1080p full 3D format.

IMPORTANT:

1) Use high quality LAN cables (if you use a long distance CAT6 with 100% copper conductor is better)

2) If the LAN cable has to pass through existing corrugations, check that there are no other cables that could give interference and / or noise;

3) The transmitter and the receiver must be placed in cool places and as ventilated as possible in order to best dissipate the heat.

4) If all the declared meters are used, the HDMI cables must not exceed one meter in length (better from 0.50m and of quality, with copper conductors).

N. 1 Power supply included.