HDMI EXT. 4Kx2K@60Hz CAT5e/6 60M

This audio-video signal extender on a single LAN cable allows to extend the digital HDMI signal over long distances (max 60mt) with a maximum resolution of 4Kx2K at 60Hz using a 100% copper CAT6 AWG24 cable with IEEE-568B standard.
The extender also supports remote control signal with a bi-directional frequency, so as to be able to control the remote source (IR option valid only for model 42/12321).

Supports HDMI video signal: 4Kx2K @ 60Hz / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i.

Supports digital audio signals: DTS-HD / Dolby-TrueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD.
Power supplies included.

IMPORTANT:

1) Use high quality CAT6 LAN cables with 100% copper conductor;

2) If the LAN cable has to pass through wall'tubes, check that there are no other cables inside that could cause interferences;

3) The transmitter and the receiver must be placed in cool and as airy places as possible in order to dissipate heat better.

4) If you use all the stated meters, the HDMI cables must not exceed one meter in length (better than 0.50mt and quality, and with copper conductors).